Steel Weight Calculator and Formulas: Plate, Bar, Pipe, Tube and Profiles

Published November 2026  ·  7 min read  ·  Technical Reference  ·  Tools

Steel is priced, shipped and loaded by weight, so every quotation starts with a weight calculation. This page gives you a free steel weight calculator for the most common shapes, the formulas behind it, quick-reference weight tables for plates and bars, and the densities of steel, stainless steel and other metals. It also explains why the theoretical weight on your quote can differ from the weight on the weighbridge.

Quick answers
• Density of carbon steel: 7,850 kg/m³ (7.85 g/cm³).
• Steel plate: thickness (mm) × 7.85 = kg per m². A 10 mm plate weighs 78.5 kg/m².
• Round bar and rebar: d² × 0.00617 = kg per metre (d in mm). A 16 mm bar weighs 1.58 kg/m.
• Round pipe: (OD − t) × t × 0.02466 = kg per metre (in mm).

Steel Weight Calculator

Theoretical weight from nominal dimensions. Hollow sections are calculated with sharp corners, which slightly overstates the weight of tubes with rounded corners. For HEA, HEB, IPE, purlins and LGS profiles, use the weight tables in our HEA/HEB, IPE, purlin and LGS guides.

Steel Weight Formulas

All formulas give the weight in kilograms, with dimensions in millimetres and length in metres, for carbon steel (7,850 kg/m³). For another material, multiply the result by its density divided by 7,850.

ShapeFormula (kg)Short formExample
Plate / sheett × W × L × 7.85 / 1000
(t, W in mm; L in m)
t × 7.85 kg/m²10 mm plate, 1.5 × 3 m: 10 × 7.85 × 4.5 = 353 kg
Round bar, rebarπ/4 × d² × L × 0.00785d² × 0.00617 kg/mØ20 mm: 400 × 0.00617 = 2.47 kg/m
Square bara² × L × 0.00785a² × 0.00785 kg/m30 mm: 900 × 0.00785 = 7.07 kg/m
Flat barW × t × L × 0.00785W × t × 0.00785 kg/m100 × 10 mm: 7.85 kg/m
Hexagon bar (across flats s)0.866 × s² × L × 0.00785s² × 0.0068 kg/ms = 24 mm: 3.92 kg/m
Round pipe / CHSπ × (OD − t) × t × L × 0.00785(OD − t) × t × 0.02466 kg/m114.3 × 4 mm: 110.3 × 4 × 0.02466 = 10.88 kg/m
Square / rectangular tube(2 × (B + H) − 4 × t) × t × L × 0.00785(2(B + H) − 4t) × t × 0.00785 kg/m100 × 100 × 4 mm: 384 × 4 × 0.00785 = 12.06 kg/m
Angle (legs a, b)(a + b − t) × t × L × 0.00785(a + b − t) × t × 0.00785 kg/mL 50 × 50 × 5: 95 × 5 × 0.00785 = 3.73 kg/m
Why the constants work: 7,850 kg/m³ equals 0.00785 kg per mm² per metre of length. The rebar constant 0.00617 is π/4 × 0.00785, which is the same as the well-known rule d² / 162. For a pipe, 0.02466 is π × 0.00785.

Steel Plate Weight Table (kg per m²)

Thicknesskg/m²Sheet 1000×2000
kg
Sheet 1250×2500
kg
Sheet 1500×3000
kg
Sheet 2000×6000
kg
0.5 mm3.927.812.317.747.1
0.8 mm6.2812.619.628.375.4
1 mm7.8515.724.535.394.2
1.5 mm11.7723.536.853.0141.3
2 mm15.7031.449.170.7188.4
2.5 mm19.6239.261.388.3235.5
3 mm23.5547.173.6106.0282.6
4 mm31.4062.898.1141.3376.8
5 mm39.2578.5122.7176.6471.0
6 mm47.1094.2147.2211.9565.2
8 mm62.80125.6196.2282.6753.6
10 mm78.50157.0245.3353.2942.0
12 mm94.20188.4294.4423.91,130.4
15 mm117.75235.5368.0529.91,413.0
20 mm157.00314.0490.6706.51,884.0
25 mm196.25392.5613.3883.12,355.0
30 mm235.50471.0735.91,059.82,826.0
40 mm314.00628.0981.21,413.03,768.0
50 mm392.50785.01,226.61,766.24,710.0

Round and Square Bar Weight Table (kg per m)

Diameter / sideRound bar kg/mSquare bar kg/mRound bar, 12 m length, kg
6 mm0.2220.2832.7
8 mm0.3950.5024.7
10 mm0.6170.7857.4
12 mm0.8881.13010.7
14 mm1.2081.53914.5
16 mm1.5782.01018.9
20 mm2.4663.14029.6
22 mm2.9843.79935.8
25 mm3.8534.90646.2
28 mm4.8346.15458.0
30 mm5.5497.06566.6
32 mm6.3138.03875.8
36 mm7.99010.17495.9
40 mm9.86512.560118.4
45 mm12.48515.896149.8
50 mm15.41319.625185.0
60 mm22.19528.260266.3
70 mm30.21038.465362.5
80 mm39.45850.240473.5
90 mm49.94063.585599.3
100 mm61.65478.500739.8

Theoretical values for carbon steel (7,850 kg/m³). Rebar sizes follow the same values as round bar of the same nominal diameter. See our rebar range.

Densities of Steel and Other Metals

MaterialDensity (kg/m³)Factor vs carbon steel
Carbon and low-alloy steel (S235, S355, rebar)7,8501.000
Stainless steel 304 / 304L7,9301.010
Stainless steel 316 / 316L7,9801.017
Ferritic stainless 4307,7000.981
Grey cast ironabout 7,2000.92
Ductile ironabout 7,1000.90
Aluminium2,7000.344
Brassabout 8,5001.08
Copper8,9601.14

Stainless steel is often calculated with 7,900 or 8,000 kg/m³ for simplicity. Agree on the density used in quotations, especially for large orders. For a comparison of materials, see carbon steel vs stainless steel and aluminium or stainless steel.

Theoretical Weight vs Actual Weight

The formulas give the theoretical weight from nominal dimensions. The steel you receive can weigh more or less, because:

  • Rolling tolerances: thickness and section tolerances in standards such as EN 10029 (plates), EN 10034 (beams) and EN 10080 (rebar) allow small deviations, mostly on the plus side for plates.
  • Coatings: zinc adds weight. A Z275 coating adds 0.275 kg/m² of sheet. See galvanized steel coating classes.
  • Corner radii: hollow sections and cold-formed profiles have rounded corners, which reduce the actual weight slightly.
  • Packing: straps, wooden spacers and pallets are included in the gross weight but not in the net steel weight.
Contract tip: State in the contract whether the price is based on theoretical weight or on actual (weighed) weight. Plates and coils are often invoiced by actual weight, while beams and bars are often invoiced by theoretical weight. The difference can reach a few percent of the order value.

Using Weight for Freight Planning

Weight also decides how you ship. A standard 40-foot container can carry roughly 26 tonnes of cargo, and a 20-foot container is usually limited by road weight rules to about 20–25 tonnes in practice. Long products over about 12 m need flat racks, open-top containers or break-bulk shipping. Calculate the total weight early, so that your supplier can plan the loading and you can compare delivered costs from Türkiye correctly.

Frequently Asked Questions

How do you calculate the weight of steel?

Multiply the volume of the steel by its density of 7,850 kg/m³. In practice, use shortcut formulas: plate thickness in mm × 7.85 gives kg per m², d² × 0.00617 gives kg per metre for round bar, and (OD − t) × t × 0.02466 gives kg per metre for round pipe, with dimensions in mm.

What is the density of steel?

Carbon steel has a density of about 7,850 kg/m³ (7.85 g/cm³). Austenitic stainless steels are slightly heavier: about 7,930 kg/m³ for 304 and 7,980 kg/m³ for 316.

How much does a 1 m² steel plate weigh?

A steel plate weighs 7.85 kg per m² for each millimetre of thickness. A 5 mm plate weighs 39.25 kg/m², a 10 mm plate 78.5 kg/m² and a 20 mm plate 157 kg/m².

How much does rebar weigh per metre?

Rebar weight per metre is d² / 162, with d in mm. For example, 8 mm weighs 0.395 kg/m, 12 mm weighs 0.888 kg/m, 16 mm weighs 1.58 kg/m, 20 mm weighs 2.47 kg/m and 32 mm weighs 6.32 kg/m.

What is the formula for steel pipe weight?

Steel pipe weight in kg per metre is (outside diameter − wall thickness) × wall thickness × 0.02466, with dimensions in mm. For example, a 114.3 × 4 mm pipe weighs about 10.88 kg/m.

Why is the delivered weight different from the calculated weight?

Calculated weights are theoretical and use nominal dimensions. Rolling tolerances, coatings, corner radii and packing make the actual weight differ, usually by a few percent. Agree in the contract whether you pay by theoretical or actual weight.

Know your tonnage? Get a price.

Send your list of plates, bars, tubes or profiles with quantities. Steeling.net returns offers from selected Turkish mills and stockists, with weights, delivery terms and certificates. There are no fees for buyers.

Get a Free Quote →