Structural Steel Sections — IPE, HEA, HEB, UPN, Angle & T-Bar from Turkey
Steeling.net supplies the full range of hot-rolled structural steel sections from certified Turkish mills to wholesale buyers, construction companies, steel distributors, and engineering firms worldwide. Our product range covers IPE and IPN beams, HEA/HEB/HEM wide-flange sections, UPN U-channels, equal and unequal angle steel (L-profiles), and T-bar steel.
All sections comply with European norms (EN 10034, EN 10279, EN 10056, EN 10055) and are available with mill test certificates (MTC/MTR). Standard lengths are 6 m and 12 m; cut-to-size service available. No buyer fees — free quote within hours.
Get a Free Quote for Structural Sections
Section Types — Browse by Profile
IPE / IPN Beams
Narrow-flange I-beams for floors, mezzanines, and secondary beams. IPE 80 – IPE 600.
HEA / HEB / HEM Beams
Wide-flange H-sections for columns and heavy frames. HEA 100 – HEA 1000.
UPN Channel Steel
U-profile channels for secondary beams, bracings, and crane rail support. UPN 30 – UPN 400.
Angle Steel (L-Profile)
Equal and unequal leg angles for trusses, brackets, and frames. 20×20 – 200×200 mm.
T-Bar Steel
Hot-rolled T-sections for stiffeners, grating supports, and machine parts. 20×20 – 100×100 mm.
Structural Steel Sections — Size Reference Table
| Profile Type | Standard | Size Range | Grade | Typical Use |
|---|---|---|---|---|
| IPE Beam | EN 10034 | IPE 80 – IPE 600 | S235, S275, S355 | Floors, secondary beams, mezzanines |
| IPN Beam | DIN 1025-1 | IPN 80 – IPN 550 | S235, S275 | Older structural designs, refurbishment |
| HEA Beam | EN 10034 | HEA 100 – HEA 1000 | S235, S275, S355 | Columns, light to medium frames |
| HEB Beam | EN 10034 | HEB 100 – HEB 1000 | S235, S275, S355 | Standard columns and beams |
| HEM Beam | EN 10034 | HEM 100 – HEM 1000 | S355 | Heavy columns, high-load structures |
| UPN Channel | EN 10279 | UPN 30 – UPN 400 | S235, S275, S355 | Secondary beams, crane brackets |
| Equal Angle | EN 10056-1 | 20×20×3 – 200×200×24 mm | S235, S275, S355 | Trusses, lattice frames, shelving |
| Unequal Angle | EN 10056-1 | 30×20 – 200×150 mm | S235, S275 | Purlins, edge trims, brackets |
| T-Bar | EN 10055 | 20×20×3 – 100×100×10 mm | S235, S275 | Stiffener plates, grating support |
Why Buy Structural Sections from Turkish Mills?
Turkey is one of Europe’s largest steel producers, with integrated mills operating BOF and EAF furnaces at scale. Turkish structural sections offer EN-certified quality at 10–20% lower cost than equivalent Western European mill output, with competitive lead times of 2–4 weeks to most global destinations.
- EN 10034 / EN 10279 / EN 10056 compliant — CE marking available
- Mill test reports (MTR) with full chemical and mechanical analysis
- Grades: S235JR, S275JR, S355JR/J2 — ASTM A36 equivalent available
- Standard mill lengths (6 m / 12 m) or cut-to-size per your project
- Full export documentation: packing list, certificate of origin, bill of lading
- Consolidated shipments available — combine multiple section types in one container
Request Pricing — Free for Buyers
Frequently Asked Questions
What is the difference between IPE and HEA beams?
IPE (I-Profile European) beams have narrow flanges relative to their height, making them efficient for bending in the strong axis — ideal for floor beams and secondary structural members. HEA (also called IPBL) beams have wide flanges with a more square cross-section profile, providing better resistance to buckling and bending in both axes — preferred for columns and heavy primary beams. For the same nominal height, HEA is heavier and stiffer than IPE.
What steel grades are available for structural sections?
Standard grades available are S235JR, S275JR, and S355JR/J2 per EN 10025. S355 is the most commonly requested for load-bearing structures due to its higher yield strength (355 N/mm²). ASTM A36 equivalent and high-strength grades (S420, S460) are available on request with longer lead times.
Can I order sections in custom lengths?
Yes. Cut-to-size service is available for all section types. Standard mill lengths are 6 m and 12 m. Custom lengths from 1 m upward can be arranged, with cutting tolerances per EN ISO 2768-m. Custom cutting is included in the quote — no separate fee.
Do you provide mill test certificates?
Yes. Mill test reports (MTR/MTC) are provided with every shipment as standard, including EN 10204 3.1 certificates showing full chemical composition (C, Mn, Si, P, S, etc.) and mechanical test results (yield strength, tensile strength, elongation, impact toughness). EN 10204 3.2 inspection by a third party can be arranged on request.
What is the minimum order quantity for structural sections?
We process inquiries of any size — there is no minimum for a quote request. For international shipments, practical minimums are typically 5–10 tonnes for LCL (groupage) and 20+ tonnes for full container load (FCL). For smaller quantities, we can consolidate with other section types into a single shipment to keep freight costs reasonable.
Do you supply galvanized or coated structural sections?
Hot-dip galvanized angles and channels are available in standard sizes for corrosion-exposed applications (outdoor structures, agricultural buildings, coastal environments). Epoxy or zinc-rich primer coating can also be arranged. Galvanized IPE and HEA beams are available in selected sizes — please specify in your quote request.